Industrial Dryers for Sale
Equipment Xchange buys and sells used industrial dryers for the pharmaceutical, chemical, food, nutraceutical and other process industries. Our inventory includes vacuum dryers, double cone vacuum dryers, fluid bed dryers, spray dryers, Nutsche filter dryers and vacuum shelf dryers from leading manufacturers.
Available used drying equipment ranges from laboratory and pilot-scale dryers to complete production systems. Equipment may feature stainless steel product contact surfaces, sanitary construction, heating jackets, vacuum systems, controls, dust collection, blowers and other process components.
Browse our current inventory of used industrial dryers below or contact Equipment Xchange with your required dryer type, capacity, material of construction, evaporation rate, temperature, vacuum and process requirements.
Used Double Cone Vacuum Dryers
Used double cone vacuum dryers provide gentle tumble drying under vacuum and are commonly used for powders, chemicals, pharmaceuticals and other heat-sensitive materials. The rotating vessel continually exposes product surfaces while vacuum lowers the temperature required for moisture or solvent removal.
Patterson Kelley 60 Cuft Twin Shell Dryer 14184-001
Used approximately 60 cubic foot Patterson Kelley stainless steel jacketed twin shell dry dryer / blender. Stainless Steel contacts. Rated 50 # / cu ft. Includes: Stands - Covers - Motor, reducer and brake.
Paul Abbé RCVD-30 5 Cu Ft Double Cone Vacuum Dryer 13024-002
Used Paul Abbe Model RCVD 30 double cone vacuum dryer. Approximately 5 cubic foot capacity. Stainless steel construction. 30" diameter. Rated Full Vacuum internal at 250 degrees. F. Jacket rated 14.7 psi at 250 degrees F. 1/2 Hp Reeves Varispeed drive. Serial number A47201. Built 1998. Controller Class 1 Groups BCD. Class 2 Groups EFG. Mounted on Stand. Includes: Sterlco model M9016-J1 Temp control for oil for jacket. 3 phase 60 cycle 460 volt. 24000 watt - 115 volt.
Patterson-Kelley 10 Cu Ft Double Cone Vacuum Dryer 12094-001
Used 10 cu. ft. Patterson-Kelley Double Cone Vacuum Dryer, 304 stainless steel construction, rated full vacuum internal, jacketed for 50 PSI, 40#/cu. ft. max. material density, 14" feed opening with cover, 8" discharge with butterfly valve, on stands with 2 H.P. 220/440 motor drive, 25 RPM shell speed
Komline-Sanderson 20 Cu Ft Jacketed Tumble Dryer 12640-007
Used approximately 20 cuft stainless steel Komline Sanderson jacketed tumble dryer. SN B27. Built 1966. Vacuum tube. Drive and is insulated.. Rated 15 psi internal and 45 psi on the jacket.
Used Vacuum Shelf Dryers
Vacuum shelf dryers are used to dry heat-sensitive products under reduced pressure while heated shelves transfer thermal energy to the product. They are commonly used in pharmaceutical, chemical and specialty processing applications where controlled low-temperature drying is required.
Stokes Vacuum Shelf Dryer – 8 Sq Ft 12585-018
Used Stokes vacuum shelf dryer. Model 900 3 381. Approximately 8 square foot surface area shelving. Rated at 50 PSI with full vacuum in the chamber at 650° F. Two shelves 24" x 24". Chamber is 30 inches wide by 29 inches deep by 20 inches high. Serial number P 77143. National board number 1083. Herisite coated chamber and shelves.
Used Fluid Bed Dryers
Fluid bed dryers pass heated process air through a bed of material to provide efficient heat and mass transfer. They are commonly used for drying powders, granules, food products, pharmaceuticals, chemicals and other particulate materials.
Used fluid bed drying systems may include process air blowers, heaters, ductwork, cyclones, baghouses, controls, product screens and cooling sections. Important specifications include bed dimensions, airflow, inlet and outlet moisture, evaporation capacity, heat source and product throughput.
Witte Vibrating Fluid Bed Dryer System 14105-001
Used Witte vibrating fluid bed dryer system with integral baghouse. Includes: Witte fluid bed approximately 6 square foot surface area, approximately 10" wide X 8' overall long on castors with 1 Hp motor 3 phase 60 cycle 208-230/460 volt 1755 rpm Class 1 Group D main motor and C-4 gearbox shaker. Steam heater skid with 7.5 Hp Chicago size 11 blower. Last use for Tea Extraction. Food Grade System
GEA Fluid Bed Dryer – 4,244 Lb/Hr Design Capacity 14095-001
Used GEA Fluid bed dryer, approximately 36" wide X 144" long bed. Design rate 4,244 lb / hr with infeed moisture at 20% by wt, and final product output at 3% by wt. Evap capacity 744 lb / hr Comenco systems duct heater/burner and control panel. Model DH-65-4-0-NPO. Serial # 91322. Runs on natural gas. Maximum input 4,000,000 BTU / h. Induced Draft Fan: Located at Cyclone at top. Air Blower Twin Cities Size 921-CW driven by 75 HP motor 1475 rpm 460v 3/60. Rated at 15,879 cfm at 13" sp. FANC/03 Forced Draft Fan (inlet)Requires Fan 50HP 1800 rpm 460v 3/60 Twin Cities Air Blower 7897 cfm at 16 sp. Inlet fan FANC/01 Forced Draft Cooler Fan: 20HP 1800 rpm 460v 3/60 Twin Cities air blower 3039 cfm at 12 sp Outlet Fan FANC/02 (4) Sifter Screen Units. Tru-Balance (2) 40 7/8" sq, (2) 30 7/8" sq. Ducting included. Last used for corn germ drying - product density at 32 PCF.
Glatt GPCG-1 Laboratory Fluid Bed Dryer – 5 Liter 14104-5438
Used Glatt GPCG-1 Laboratory Fluid Bed Dryer, Sanitary Stainless Steel construction with internal pharmaceutical grade finish, rated 5 Liter capacity, 2.2 KW fan, 3.96 KW heater, internal spray nozzle, peristaltic feed pump,internal dust collector, sample tube, capable of being used with roto-granultor attachment (Not Included), self contained cabinet, with controls, 3/60/220 volt, Serial# 4781, Built 1987. (Prior Service- FDA Approved GMP Facility)
Used Spray Dryers
Spray dryers convert a liquid feed into a dried powder by atomizing the product into a heated air stream. Spray drying is commonly used in food, pharmaceutical, chemical, flavor, dairy and specialty powder applications.
Yamato GB22 Laboratory Spray Dryer12963-012
Used Yamato model GB22 lab spray dryer. Glass spray dryer with glass drying chamber and cyclone collector - Stainless steel nozzle atomizer with controls - 220 volt - Heater: 2kW - Aspirator: Bypass-type blower - Weight: Approx. 110kg - Dry air flow meter: Digital display - Temperature control range: 40 deg.C to 200deg.C - Dimensions (W x H x D): 760 x 1,345 x 420 mm