Equipment Xchange LLC
Attritor Mills
12450-002
Used Szegvari attritor system size O1HDDM. Batch type. Tank capacity (750 cc) Working capacity (175 cc). Media Capacity (280cc) 1/2 hp motor 3 phase 230/460 volt. SP500 Variable speed drive. Stainless steel shaft with Lub-R (plastic) Disk and spacers. Cover to tank is stainless steel. Inside liner of tank is polyethylene. Tank is water jacketed. 220 lbs.
Item 12450-002
Fitz Mills
13980-016
Used Model D6 Fitzmill. Stainless steel contacts. Swinging blunt hammers. Gravity fed. 5 Hp 3 phase 60 cycle 230/460 volt 1740 rpm. Item 13980-016
14030-041
Used D6 Fitzmill, stainless steel contacts. Pan fed. Belt drive. On portable base. 7.5 Hp motor belt drive. Item 14030-041
14030-040
Used Fitzmill model FASO12, stainless steel contacts. SN 4334. Approximately 20 hp drive. Gravity fed. Jacketed bearings. 4 legs. Item 14030-040
14030-039
Used Size 12 Fitzmill, stainless steel contacts. Gravity fed. Type 625 blades. 20 Hp motor. Mounted on base with legs. Item 14030-039
Fluid Air Mills
12231-001
Used Fluid Air production scale powder mill model 007. Stainless steel. Speed 500-7200 rpm. Gravity fed. Multiple screens included. 10 HP motor, 3 phase, 60 cycle, 1735 rpm. Mounted on stainless steel cart with castors.
Item 12231-001
Media Mills
11434-009
Used Fryma Coball mill model MS32. Stirrer Bead mill. 2.5 Bar internal. 2.0 Bar Jacket. SN M16559. Built 1994.
Item 11434-009
12600-020
Used Szegvari attritor type 01HDT. Size 01. SN 911002. (Requires shaft and media). Reeves varispeed drive 1/4 hp 3 phase 60 cycle 208-230 volt.
Item 12600-020
12466-001
Used Dispermat Model SL-M5 horizontal bead mill. 50/60 HZ. 230 Volt. Amp 10. SN 04219097. Built 1997.
Item 12466-001
12822-001
Used Sweco dry grinding mill model DM10L. 5 Hp motor 3 phase 60 cycle 208/230 volt 1160 rpm. With Media. Serial 309318-A0805. 10 cuft/.283 m3 chamber capacity. Media load 1000 lb. (L Designation from Sweco - Replaceable abrasion-resistant elastomer lining)
Shipping weight 1600 lbs.
PulverizerMills
13980-001
Used Mikropul model 3TH stainless steel mill. Screw Feeder. 40 Hp main drive motor. Mounted on Stand. Item 13980-001
Mills Granulator
12585-001
Used KEK Kemutek Kibbler mill model M303C. Stainless steel construction. 3KW Textron motor 1725 rpm with Radikon gearbox. Stainless steel rotor base housing and screens. Cantilever design. Serial number A16879UNIT HAS BEEN TEST RUN AND IS READY TO SHIP
Item number 12585-001
13090-006
Used Alexanderwerk Rotor Fine Granulator, Model RFG 350 V, 316 Stainless Steel. Rotor approximate 13" diameter x 14-3/4" wide with 1" wide blades. Circle screen, front access door, top feed, bottom discharge. Requires 2 hp variable speed gear motor. Mounted on a stainless steel frame. Approximatel Particle size 0.63 to 8mm, approximate throughput 200 to 750 kg/hr. Item 13090-006