Equipment Xchange LLC
14135-001
Used approximately 87 cu ft working 100 cu ft total stainless steel ribbon blender. Approximately 42" X 48" X 96" long. Open top with full cover. Jacketed trough. Center bottom outlet with valve. 10 hp Motor, gear reducer, chain and guard. Serial number 1286. Item 14135-001 2 Available.
13015-001
Used approximately 5 cubic foot stainless steel double ribbon blender. Approximately 16" wide X 38" long X 19" deep. Center bottom discharge. Approximately 1.5 hp Motor and reducer. Top hinged cover. Mounted on legs. Built by Day.
Item 13015-001
12822-003
Used approximatley 10 cu ft stainless steel ribbon blender. Double ribbon. Stainless steel contacts. Carbon steel jacket. Built by Howes. SN 108910. Center bottom outlet with manual valve. Hinged lid with counter weights.
Item 12822-003
13980-003
Used approximately 20 cu ft stainless steel ribbon blender. 24" Wide X 72" Long. Outer ribbon 2” - interrupted - 3”x 7” paddles inner. Stainless Steel Lid. . 5 Hp motor 3 phase 60 cycle 208-230/460 volt 1750 rpm belt driven to gearbox with guard. Center bottom discharge with slide gate valve. Top mounted safety grate. Top mounted dump bin enclosure. Carbon steel legs provide approximately 38” clearance from outlet to ground.
Item 13980-003
11421-001
Used approximately 40 cubic foot stainless steel double ribbon blender. Trough is approximately 32"" wide X 7' long X 35"" deep. Center bottom outlet 4"" flange. Requires motor and reducer, chain and sprocket drive. Hinged cover. Unit is jacketed on sides and bottom.
Item 11421-001
11386-001
Used approximately 50 cubic foot working capacity stainless steel double ribbon blender. Approximately 30"" wide X 126"" long X 33"" deep. Motor with reducer to belt drive. 2 bottom outlets. Requires cover.
Item 11386-001
11059-006
Used ribbon blender approximately 100 cuft carbon steel. Double ribbon interrupted flight. 48"" X 84"" long. Center bottom discharge. Jacketed trough. Jacket rated 40 psi @ 650 degrees F. Gearhead 20 hp 3 phase 60 cycle 230-460 volt 155 rpm output to sprocket. Mfg by Young. SN 222. NB 19.
Item 11059-006
11059-005
Used ribbon blender approximately 100 cuft carbon steel jacketed. Double ribbon interrupted flight. 40"" X 120"" long. Center bottom discharge. 20 hp motor 3 phase 60 cycle Link belt reducer output rpm 153.5 with sprocket providing approximately 22 rpm ribbon speed. Mfg by J H Day. SN 77973.
Item 11059-005
10977-002
Used J H Day approximately 100 cubic foot carbon steel double ribbon blender. Trough 3' 6"" wide X 120"" long. Center discharge. Cover. Requires 25 hp motor 3 phase 60 cycle 230/460 volt 1740 rpm and a Faulk Reducer v belt driven.
Item 10977-002
13971-001
Used approximately 210 cuft stainless steel ribbon blender. Approximately 62" wide X 120" long X 70" deep. Double ribbon. Center bottom discharge. Ribbon and shell are stainless steel. Gearbox (No Motor). Built by MSC Engineering. Built 2000. Item 13971-001