13976-001
Used- GEA Westfalia CTC-1-06-107 Solid Bowl Disc Centrifuge. 316 Stainless steel (product contact areas). Maximum bowl speed 12000 rpm, clarifier design (liquid/solids separation), rated 1.0 kg/cu dm heavy phase, 1.4 kg/cu dm solids, 1 kW motor, centripetal pump liquid discharge, belt drive configuration, bench top design with control panel with VFD motor controller, 120 volt. Serial number 9013-440 built 2003
14006-001
Used rebuilt GEA Westfalia GSC 45-06-177 clarifier. Previously used in a brewery. Belt driven 25 hp vertical motor. Bowl looks like new. 7230 RPM bowl speed. On a stainless steel brewery skid with piping, pumps, turbidity sensors and Allen Bradley Panel view 1000 touch screen controller. Optek 4000 product feed and discharge turbidity transmitter. VFD controls. Full set of tools and manual. SN 1727-409. Includes new gaskets, seals, and bearings. Test run and ready to ship.
14133-001
Used GEA Westfalia Model HB025 centrifuge system. Includes: HB025 centrifuge, process valves and electrical control panel. SKid mounted. Westfalia Centrifuge features: Hydraulic Ejection System. Hydo- Hermetic Feed. Skid Mounted pre-wired, piped and ready for operation. Designed for feed capacity up to 30 BBL/HR. Rate and clarification efficiency dependent on inlet solids contents and desired clarity. Yeast solids ejections: 20-22% by weight yeast solids. Utilities: Flush water 15 gpm on demand rinsing. Operating water 1 gallon per discharge 1 gpm for hood cooling and solids catcher. Electrics: 9.25 Kw installed. Air Instruments: 3 scfm nominal. Service Requirements: Potable water 45 psig. Electrics 3 phase 60 cycle 460 volt (single phase freq converter available). Instrument air 100 psig dry & filtered. CIP Solution 15 gpm NaOH 3% be weight 175 degs F. CO2 5 bar available. Westfalia HB025 with single flat belt drive. Low speed vertical mount air cooled motor. Clarified liquid centripetal pump. Cast iron frame. Hood and solids chute and all contact parts Stainless Steel. Some spare parts and tools included. Control panel with starters and AB Compact Logix PLC - Panel View 600 Operator interface supervising: bowl speed, discharges, operating water pressure, motor amperage and temperature, safety alarms, beer outlet turbidity and vibration.
14100-002
Surplus GEA-Westfalia Disc Centrifuge, Model CSC-6-06-476. Skid mounted with all piping with Tri-clamp connections with PLC control panel, motor, pump and piping.
14004-001
Used Type GSE 125-06-777 Westfalia Separator. Self-Cleaning Disc Clarifier. Liquid discharge: With centripetal pump under pressure. Feed and discharge are in a closed system. The product feed and discharges in the bowl are hydro hermetically sealed. – Hydraulic capacity: 50,000 l/h – Bowl speed: 5900 rpm – Motor: 55 Kw 75 Hp 3 phase 50/60 cycle Motor – Process temperature range: 5–95°C. Built 2012. Serial Number. 1732-479. Some tools.
13042-003
Used GEA Westfalia Model SC35-03-177 disc centrifuge. Separator design. Liquid outlet is light phase paring device, heavy phase open . Includes water harness. With approx 25 hp vertically mounted motor. On skid with controls and some tools. Hardly used.
12956-001
Used Westfalia centrifuge model SAMM 15006, self cleaning separator. Stainless steel. Rated 15000 liter per hour. Bowl speed 4500 rpm. Includes tools, control panel and some spares. (MSA 120-01-076).
13042-002
Used GEA Westfalia Model SA1-03-076 self cleaning centrifuge. Separator design. Heavy phase paring device, light phase gravity.Has Reeves vari drive.
13042-001
Used GEA Westfalia Model SA1-02-076 self cleaning centrifuge. Separator design. Light phase via paring device, Heavy phase gravity. Stainless steel contacts. Reeves vari speeed drive.
13002-001
Used Westfalia Model SA 14-01-076 Separator type Disc Centrifuge. Both phases discharged by pairing device pump. Reversing separator disc. Sanitary Covers. Stainless steel contact parts. Bowl speed 7,700 R.P.M. Flanged 10 HP 3/60/440V motor. Driven by friction clutch. Some tools included.
10827-001
Used Westfalia model SA40-06-177 automatic disc centrifuge. Stainless steel contacts. 40 hp motor. Heavy phase 1.0 Kg/cm2. Solid phase 1.1 Kg/cm2. Includes some tools and speed controller. Serial # 1652613.
11616-001
Used Westfalia model SA 40-01-177 separator. Both liquid phases are pumped. All stainless steel contacts. 40 HP 460 volt motor. Base plate included.
11512-001
Used Westfalia model CSA19-06-476 10 HP centrifuge. Biotech separator design. 316 stainless steel construction, steam sterilizable with CIP feature, self cleaning 12"" disc type bowl, 8150 RPM, rated solids 1.3 Kg/decimeter, heavy liquid 1.0 Kg/decimeter, complete with 7.5 KW, 230/460 motor, tools. New 1990. Previously used in Biotech application
11982-001
Used Model SAMR-15037 Westfalia De-sludger clarifier, stainless steel contact surfaces, 4650 rpm max. bowl speed, bowl has 4.25 gallon sludge capacity, rated to 100 gmp, with 40 HP 3565 RPM 230/460 Volt motor.
11915-001
Used Westfalia model SAOOH 15037 (SA40-03) disc centrifuge. Stainless steel bowl, housing and covers. SN 1631060. Belt driven by 30 Kw Motor 3 phase 50 cycle 2890 rpm.
12003-001
Used Rebuilt Westfalia SA40-03-177 disc centrifuge. All wetted parts being stainless steel. Separator design. Rebuilt on base plate with tools and spare gaskets. Rated up to approximately 40 GPM With PLC control panel.
Item 12003-001
10746-001
Used Alfa Laval model AX-213S-31B-60 high speed, high ""G"" separator. Max speed of 6810 rpm. Clarifier design. Stainless steel wetted parts. Timed discharge of the solids. 50 Hp 3 phase 60 cycle 460volt 3530 rpm motor. Some tools and spares included. Spare bowl available. S/N 2985
10409-001
Used Delaval auto desludger model BRPX-207-35S-60. Type 316 stainless steel with a KN deep sludge cover. Two way clarifier. Equipped with a 10 hp directly connected clutch motor drive. Built 1974. Last used in dairy application. Includes timer box and tools.